Most modern families will choose shower rooms, which divide the bathroom well and set up independent bathing space. When showering, it can block the flying water droplets and keep the bathroom relatively dry. It does not conflict with other daily life. When taking a bath in winter, the shower room has a smaller space, which is warmer and will not be too cold when taking a bath. The shower room occupies a small area and is easy to install, so it is widely loved by consumers. You need to pay special attention to the purchase of shower rooms, and the purchase of shower room hardware accessories should not be ignored. How to buy shower room hardware accessories? Let me explain it to you next!

First, let me introduce the types of shower room doors: daily shower rooms are divided into swing doors and sliding doors, and the hardware accessories used are also different.

1. Accessories required for swing door shower rooms: Glass Clamps, fixed angle brackets, Handles, pull rods, water retaining strips, etc.

2. Hardware required for sliding door shower rooms: hanging wheels, hanging brackets, positioning devices, ground guides and guide rails, etc.

Next, let me introduce the functions of shower room hardware accessories:

1. Fixed angle bracket

The fixed angle bracket is a lightweight shower room glass fixing device. It is used to fix the glass firmly.

The installation methods are divided into glass to glass and glass to wall.

The connection angles are divided into: 90 degrees, 135 degrees, and 180 degrees.

2. Shower room glass clamp

Glass clamp is a heavy-duty glass fixing device that can support the weight of dozens or even hundreds of kilograms of glass.

The installation methods are divided into: glass to glass, glass to wall.

The connection angles are divided into: 90 degrees, 135 degrees, and 180 degrees.

The basic materials are divided into: pure copper and stainless steel.

The opening and closing methods are divided into: mechanical and hydraulic.

The use of special bathroom Glass Clamps can improve the service life and firmness of the shower room, and the corrosion resistance in a humid environment can be improved by electroplating the surface.

3. Shower room handle

The shower room handle has two functions, the first is to open and close the bathroom door, and the second is to hang floor towels or bath towels.

The installation methods are divided into: horizontal installation and L-type installation.

The basic materials are divided into: pure copper and stainless steel.

4. Water retaining strip

The water retaining strip is used to fill the gap of the flat-opening shower room Glass Door, so that the shower room does not leak water during use.

The installation method is: embedded in the side or bottom.

The suction angle is: 90 degrees, 135 degrees, 180 degrees. The basic material is: PVC and magnet.

5. Hanging rail pulley

The sliding door partition shower room is mainly suitable for dry and wet separation bathrooms, and the shower room has a large opening and closing space.

The sliding pulley is divided into: framed glass door and frameless glass door.

The door leaf opening is divided into: single leaf sliding door and multi-leaf linkage sliding door.

The wheel seat used for the sliding door pulley should be made of compression-resistant and weight-resistant materials. It is the top priority in the sliding door of the shower room. Only a pulley with a reasonable structure and excellent material can ensure the service life of the shower room and the safety of consumers.